
QS 5002
Motorized Critical Care Bed Peak

- • Over all Dimensions: 2160 × 1060 × 395–705 mm
- • Mattress Platform Size: 1980 × 860 mm
- • Mattress Platform Size inches: 78″ × 34″
- • Bed Height w/o Mattress: 395–705 mm / 15.5″–30″ (Approx.)
- • Bed extension (Optional): 200 mm / 8″ (Approx.)
- • Back Rest: 70°
- • Knee Rest: 25°
- • Trendelenberg & Reverse Trendelenberg: 15°
- • Five Position completely Motorized bed
- • Bed platform uniformly perforated in 4 sections
- • Uniformly perforated 5 mm thick P.R.B. board (Optional)
- • P.R.B. sheet is Anti-Virus, Anti-Bacterial, resistant to Fire; wet-heat tested; resistant to Harmful Chemicals & Solvent; resistant to Microbial growth; dry-heat tested; Scratch Resistant; Abrasion Resistant; & has Low Emissions
- • Roto-Sliding of the back rest: moves away from center by at least 50 mm during elevation to improve comfort & reduce thorax compression
- • All positions attained by Embedded Controller on inner & outer side of the head-side polymer railings
- • A.C.P. (Attendant Control Panel) at the foot end
- • Easily detachable Indigenous Polymer head & foot bows with 315 mm tubular inserts for extra strength
- • Extra-long 4 Pcs under-side Occidental-style side rails with inclination-degree indicators
- • 125 mm Center Locking Castor, locking controlled at foot end
- • Provided with sectional 100 mm thick mattress in PU foam
- • Safety Feature: all desired bed positions can be locked from the A.C.P.
- • Linear Actuators: 4 Pcs
- • Central locking Castors 125 mm: Yes
- • Battery Back Up: Yes
- • Full length Polymer Rails: 4 Pcs
- • Detachable Polymer Head & Foot Bows: 2 Pcs
- • Bed Platform: 1.25 mm thick CRCA sheet
- • Angle Indicators for Back Rest & T.B & R.T.B: 2 Pcs each
- • Ø 100 mm Buffers: 4 Pcs
- • I.V. Pole Powder coated with SS Telescopic Tube: 1 Pc
- • I.V. Pole Provision with Polymer inserts: 4 Pcs
- • Drainage hooks: 6 Pcs
- • Embedded Controller in the railing: 1 Pc
- • Attendant Control Panel (A.C.P.): 1 Pc
- • Electronic C.P.R. / Zero Position: Yes
- • Manual C.P.R.: Yes from Both Sides
- • Damper for C.P.R.: Yes
- • Bed Under light: 1 Pc
- • Mattress Retainers: 4 Pcs
- • Mattress 100 mm thick PU Foam: Yes
- • Power (Mains Power Supply): 230 Volts AC × 50 Hz
- • Power Consumption: 200 watt
- • Protection Voltage: 160–230 volts
- • Electrical Shock Protection: Class 1
- • Degree of Shock Protection: Type B
- • Liquid Ingress Protection: IP54
- • Rechargeable Battery: 24 V × 1.2 A Lead Acid Lithium
- • Duty Cycle: 10% (2 min On, 18 min Off)
- • Bed Platform in P.R.B. Sheet 5 mm thick: 1 Set
- • Oxygen Cylinder Cage: 1 Nos
- • S.S. Bow for Orthopaedic Traction: 1 Nos
- • S.S. Lifting Pole: 1 Nos
- • Bed Extension: 1 Nos
- • X-Ray Permeable Back rest: 1 Nos



